Do I need a standoff kit to pipe up the back of your boilers?
Rear piping is possible on all wall hung Greenstar boilers, apart from the Greenstar 2000, with room behind the appliance built in for such scenarios. Pre piping kits are also available for these boilers to save you time bending pipework. On the Greenstar CDi Classic range, the pre piping kit also comes with the gas pipe.
Wall mounting templates are included with our Greenstar boilers and show pipework paths for rear piping.
The Greenstar 2000 comes with a fabricated stand-off kit, making it possible for heating engineers to configure piping to suit individual site conditions.
Greenstar 2000 70mm Spacer frame Installation Manual.
More Gas Boiler FAQs
- This is a test FAQ
- Is an external air break required when a condensate pipe is terminated into a rainwater downspout?
- How do I re-route a condensate pipe to reduce the external run?
- Where can I find the FD (serial) number on a Greenstar boiler?
- Can I fit your controls to an external oil boiler?
- Can I run boiler flues outside?
- Does an external condensate pipe have to be insulated?
- Which programmers are compatible with my gas boiler?
- Can I put flue elbows straight on top of the boiler?
- Why is the boiler blowing fuses?